Builder Coat Exterior Emulsion Paint

Type :-

BUILDER COAT Acrylic Interior | Exterior emulsion is matt finish.

Features :-

BUILDERCOAT Acrylic INTERIOR | EXTERIOR emulsion provides a smooth long lasting rich finish to the INTERIOR & EXTERIOR wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.

Recommended Use :-

BUILDERCOAT Acrylic INTERIOR / EXTERIOR emulsion is INTERIOR / EXTERIOR wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.

Remarks :

1) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.

2) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water.

3) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.

4) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint-this is required for all paints.

5) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.

6) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application.

7) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.

8) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.