210 Intermediate Phosphate Primer

210 Intermediate Phosphate Primer

MOQ : 300 Litre

Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Finish Egg Shell to Matt
Solids By Volume 40 ± 3%
Click to view more

Preferred Buyer From

Location Worldwide

Product Details

Spreading Rate
13.3 Sq.mt / Ltr At Recommended Dft of 30 Μ
Flash Point
Base : 23°c Hardener : 23°c
Drying Characteristics (at 30°c & 65% Relative Humidity)
Surface Dry : 20-30 Minutes. Hard Dry : Overnight. Full Cure : 7 Days
BASE : 6 months HARDENER : 6 months
Mixing Ratio
Base: Hardener ( as per Our Recommendation)
By Brush/ By Conventional Spray / By Airless Spray
Type 290
Pot Life
4 Hours Min At 30° C
Recommended Dft
30 -35 µ.
Overcoating Interval
Min : 8 Hours Max : 24 Hours
5-15% & Max 5%, if required.
Nozzle Orifice
1.2-1.4mm & 0.28-0.37 mm
Nozzle Pressure
40-70 p.s.i & 1400-1800 p.s.i
Brand Name
Saffro Mellow


Two-component air-drying intermediate/primer surfacer coat.

Recommended Use :-

Recommended over putty / primer applied surfaces for better gloss retention and aesthetics in topcoats.

Surface Preparation

This being intermediate, it is applied either over primer. The surface should be free from moisture, oil and dust before application. In case of aged epoxy / PU coating or exceeded over coating, the surface should be sufficiently roughened prior to painting.

Application Method

Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix thoroughly to attain homogeneity. Add Thinner Type 290 into the mix, if required, depending on application method, and stir thoroughly for few minutes. Allow the mixture to stand still (maturation) for about 10 minutes to initiate the reaction. Strain the paint through Nylon filter cloth and apply uniformly over the surface. All equipments used for above should be properly cleaned.

Application :- By Brush / By Conventional Spray / By Airless Spray

Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner and ensure the uniform application. Use quality brushes for paint application.


1. Do not apply paint when temperature falls below 10°C or rises above 50°C and when Relative Humidity is above 85%. Do not apply during rain, fog or mist. Surface temperature must always be minimum of 3°C above Dew point.

2. Brushes and spray equipment should be cleaned with SAFFRO's recommended thinner otherwise equipment is liable to be damaged.

3. DFT variation can be obtained by change in application method / thinning ratio.

4. Shelf life indicated is minimum for this Product in sealed conditions and it is subject to re-inspection thereafter. Individual component is required to be stored in cool, dry and covered condition, away from heat and ignition.

Health & Safety

This is a solvent based paint and care should be taken to avoid inhalation of spray mist or vapours as well as contact between the wet paint and exposed skin or eyes.

Limitation of Liability

To the best of our knowledge, the technical data in our literature are true and accurate at the date of issuance but are subject to change without prior notice. We guarantee our product to conform to the specifications contained herein. We make no other warranty or guarantee of any kind, express or implied, including merchantability and fitness for particular purpose. Liability, if any, is limited to replacement of the product or refund of the purchased price. Labour or cost of labour and other consequential damages are hereby excluded.

Yes! I am interested

Looking for "210 Intermediate Phosphate Primer" ?


Explore More Products

Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us