300 Litre (MOQ)

Business Type Manufacturer, Exporter, Supplier
Brand Name Saffro Mellow
Country of Origin India
Packaging Type Plastic Bucket
Click to view more

Preferred Buyer From

Location Worldwide

Product Details

Colours
White
Finish
Smooth and Matt
Coverage
Coat: 90-100 Sq.ft/ltr & Coats: 60-70 Sq.ft/ltr
Drying Time
Surface Drying Time – 10-15 Minutes
Flash Point (is101/108 Part 1, Sec 9)
Non- Flammable
Suitability of Thinner Paint
Use Within 24 Hrs.
Shelf Life
12 Months

Type


Nano acrylic Interior Wall Primer (Water Thinnable) is an economy water-based primer that enhances the application and finish of interior topcoats.


FEATURES


Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties.


RECOMMENDED APPLICATION


Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc.


Performance Data


Remarks


a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.


 


Pre Painting Steps 



  • Plaster 

  • New masonary surface must be allowed to curecompletely.It is recommended to allow 28 days as the curing time for new masonary surfaces.

  • Cleaning

  • Surface should be free from any loose paint,dust or grease.Growth of fungus, algae or moss should be removed by wire brushing and water.

  • Filling for Cracks,holes and Dents 

  • In case of dents ,cracks and hole use SAFFRO'S SUMO acrylic wall putty or WALL GUARD white cement based wall putty.

Yes! I am interested


Application Method

No PRODUCT THINNER Dilution % by Vol Application Viscosity in Sec Recoating Period (Hrs)
1 Sand the surface with emery paper No.180 and wipe        
2 Saffro’s Nano primer water thinnable,1st coat by brush water 80-100 20-22 4-6 hrs
3 Saffro’s Wall Putty(optional): smoothern the surface by filling dents with thin coat of saffro's SUMO acrylic wall putty/WALL GUARD white cement based putty allow it to dry for 4-6 hours        
4 Sand the Surface lightly with emery paper 180 and Wipe        
5 Saffro’s Nano primer water thinnable,2nd coat by brushing on putties area Water 80-100 20-22 4-6 hrs
6 Safety Features : Non-flammable      
7 Pack Sizes: 1 Litre, 4 Litre, 10Litre, 20 Litre.      

Looking for "Nano Acrylic Cement Primer" ?

Litre

Explore More Products


Close

Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us