WALL PROTECT Exterior Primer is a water-based wall coating suitable for application on exteriors as an undercoat to exterior emulsions.
1. Excellent opacity and whiteness
2. Improves appearance of top coat
3. Does not chalk and can be applied on adequately cured fresh plaster
4. Does not require curing with water
5. Provides excellent adhesion to top coat emulsions
6. Prevents peeling off of top coat emulsions
RECOMMENDED APPLICATION :-
It can be used on all types of exterior cement plasters, exterior ceilings, asbestos sheets, concrete and existing painted surfaces.
PRODUCT TECHNICAL DATA :-
|FINISH :||Smooth and Matt|
|COVERAGE :||1 coat: 120-140 sq.ft/LTR |
(It may vary from the quoted coverage to factor such as method and condition of application and surface roughness)
|DRYING TIME :||Surface drying time – 4-5 HOURS|
|GLOSS LEVELS/SHEEN LEVELS :||Silky smooth sheen|
|FLASH POINT (IS101/108 Part 1, Sec 9) :||Non- flammable|
|SUITABILITY OF THINNER PAINT||Use within 24 hrs.|
|SHELF LIFE||18 months from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.|
PERFORMANCE DATA :-
|ABRASION RESISTANCE :||Excellent|
|WATER RESISTANCE :||Excellent|
|SHELF LIFE :||18 months from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.|
|REMARKS :||a) Kindly refer to the MSDS for the Saffro Mellow Coatings And ResinsSUMO Acrylic Wall Puttywhich gives detailed information on Safety measures while handling the paint. |
b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
c) Avoid eye and skin contact. In case of eye and skin contacts, wash with plenty of clean water.
d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint.
f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
g) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application.
h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.